News - NINGBO TONGRUN ELECTRONICS CO.,LTD

Home > News

Speaker wire gauge [2009-02-20]
Thicker wires in a cable reduce resistance. The resistance of 16-gauge or heavier speaker connection cable has no detectable effect in runs of 50 feet (15 meters) or less in standard domestic loudspeaker connections. Insulation thickness or type also no audible effect as long as the insulation is of good quality and does not chemically react with the wire itself (poor-quality insulation has occasionally been found to accelerate oxidation of the copper conductor, increasing resistance over time). High-power in-car audio systems using 2-ohm speaker circuits require relatively thick cables. ...
Speaker wire Resistance [2009-02-20]
Resistance is by far the most important specification of speaker wire. Low-resistance speaker wire allows more of the amplifier's power to energize the loudspeaker's voice coil. The shorter the cable and the greater the conductor's cross-sectional area, the lower its resistance. Depending on the hearing ability of the listener, this resistance begins to have an audible effect when the resistance exceeds 5% of the speaker's impedance. A speaker wireâ€™s impedance takes into account the wireâ€™s resistance, the wireâ€™s path (coiled wire acts as an inductor), and the dielectric...
Speaker wire Explanation [2009-02-20]
Speaker wire, like any other linear electrical component, has three parameters which determine its performance: resistance, capacitance, and inductance. If a perfect wire were possible, it would have no resistance, no capacitance, and no inductance. The shorter a wire is, the closer it comes to being perfect, as resistance decreases as length decreases in all conductors (except superconductors). Resistance is the property which has the most effect on speaker wire performance, whereas capacitative and inductive characteristics of speaker wire are insignificantly small relative to the lou...
Speaker wire [2009-02-20]
Speaker wire is used to make the electrical connection between loudspeakers and audio amplifiers. Modern speaker wire consists of two electrical conductors individually insulated by plastic. The two wires are electrically identical, but are marked (e.g. by a ridge on the insulation of one wire, the color of one wire, a thread in one wire, etc) to help easily identify the correct polarity. Some historic designs also featured another pair of wires for electrical power for an electromagnet in the loudspeaker. At least one such speaker design is still in production (in France), but essent...
Network topology [2009-02-13]
The network topology defines the way in which computers, printers, and other devices are connected, physically and logically. A network topology describes the layout of the wire and devices as well as the paths used by data transmissions. Network topology has two types: Physical logical Commonly used topologies include: Bus Star Tree (hierarchical) Linear Ring Mesh partially connected fully connected (sometimes known as fully redundant) The network topologies mentioned above are only a general representation of the kinds of topologies used in computer ne...

First < 20 21 22 23 24 25 26 27 28 29 30 31 32 >

Contact Us

Company Name: NINGBO TONGRUN ELECTRONICS CO.,LTD
Contact Person: Echo Wang
Tel: +86 574 87172275/87461795
Fax: +86 574 87172270
Email: lzg@nbtongrun.com
Office Add.: 6-6, #46 YinRunHaoJing Business Square,Haishu District, Ningbo City,Zhejiang Province, China
Zip: 315010
WebSite: www.wire-cable-solution.com, http://www.nbtongrun.com/, http://nbcable.bossgoo.com/

Product Catalogue